![]() ![]() The track can be quite harsh on tyres thanks to Sector 1 and the loads that the tyres are put through. ![]() It depends on if you want to try to eke-out a bit more straight-line speed, or if you’re happy to have that a bit lower and settle for a lower top-end value. When it comes to tyre pressure at the Circuit of the Americas, much of the selection should be based on personal preference. This setup has become the default for most races, being able to stave off lock-ups and give you enough power when needed. The 100%-50% brake pressure and bias setup will serve you well around the USA GP in F1 22. If the car feels stable enough, then you might be able to knock the values down ever so slightly for the rear ride height, sinking it to around six. This generally only applies to Sector 1 and a couple of corners in Sector 3, but if you try and setup the ride height for the rest of the lap, you will lose out big time in those two sectors. We have gone for a relatively firm front suspension and front anti-roll bar setup, with a bit more done to raise the anti-roll bar values on both the front and the rear.ĭue to the track’s features, you want your ride height to be high enough that you don’t lose the car over a kerb, where it can get unsettled easily. You don’t want your car to be over sprung, nor do you want to lose that aerodynamic stability through the faster corners. There aren’t many bumps in the USA GP on F1 22, but there are plenty of kerbs that you will be clouting, especially in the high-speed corners. Still, we’ve been mindful that if we go too far with this setup component, the stability of the car will be badly affected – and you can’t counter that all with aero levels and ride height adjustments. We have balanced it out slightly with the rear camber, being sure to not go too aggressive there.įor the toe, given that you need a sharp turning response, we have cranked the front toe and rear toe values up just a bit. You want a car that has strong grip in the sustained corners, and whilst we have left some margin for error, you should still have sufficient grip in the slower corners. Given the Esses at the Circuit of the Americas, we have gone for quite the aggressive front camber setup. Don’t be afraid to adjust it further if you so desire. You could even go as low as 50 per cent for a happy medium for this track. Thus, we have locked the differential setup a little bit more than on some tracks, but left some margin for error with the off-throttle differential settings. Whilst there are some slower corners that need outright traction, the American GP circuit has enough prolonged, high-speed corners that you are going to want good traction. So, a 22-30 setup for the wet and dry might sound a bit extreme, but it is exactly what you need to have the grip and downforce in the corners, especially the Esses in Sector 1. There is one massive back straight, but you aren’t going to be able to overtake anyone if you don’t have a strong car in the corners. F1 22 USA (COTA) setupĬircuit of the Americas is a complex beast, with a twisty section at the end and middle, and a high-speed sector to start the lap. These are the recommended settings for the best F1 22 USA setup for dry and wet laps. If you need to know more about the F1 setup components, check out the complete F1 22 setups guide. To help you win over the fans at the Circuit of the Americas, this is our guide to the USA setup in F1 22. It has a fast, sweeping Sector 1, a tight and twisty Sector 2, and then a faster and medium-speed Sector 3 – it really has got it all. The track, commonly referred to as ‘COTA,’ is one of the best tracks to currently grace the Formula One calendar. The United States always seems to have been a tough market for Formula One to crack, but it looks like it has finally achieved the feat thanks to having a new home: the Circuit of the Americas in Austin, Texas. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |